description: this document describes valueram's cl2 16m x 64-bit (128mb) sdram (synchronous dram) pc100 small outline dimm memory module. the components on this module include eight 8m x 16-bit (2m x 16-bit x 4 bank / pc100 components) 4k refresh sdram in tsop packages. this 144-pin sodimm uses gold contact fingers and requires +3.3v. the electrical and mechanical specifications are as follows: features: clk cycle time (t cc ) min. = 10ns (cas latency = 2 / max. = 1000ns row cycle time (t rc ) 70ns clk to output (t sac ) max. = 6ns (cas latency = 2) single power supply of +3.3v (+/- .3v) power 2.244 w (operating) ul rating 94 v - 0 document no. valueram0051-001.b00 02/27/02 kvr100x64sc2/128 100mhz sdram 144-pin sodimm memory module figure 1: kvr100x64sc2/128 128mb 144-pin sdram module note: all measurements are in decimal inches. note: the module defined in this data sheet is one of several configurations available under this part number. while all configurations are compatible, the dram combination and/or the module height may vary from what is described here. however, in no configuration will the module height exceed 1.250" (31.75mm).
|
